How To Install Backup Camera On Chevy Cruze

Dust and moisture resistant.

Chevrolet Rear View Camera
- Compatibility.
- Markup.
Procedure for installing a rear view camera on a Chevrolet Cruze
- How to Install a REVERSE CAMERA | 2012 Chevy Cruze LT
Tools Needed to Mount the Rear View Camera
Rear view photographic camera for Chevrolet Cruze
Using a sedan camera on other body types
- Wiring a rear camera in a 2014 Chevy Cruze
- Related posts:

Dust and moisture resistant.

This reversing camera is water and moisture resistant. It has an IP67 protection index.

Chevrolet Rear View Camera

ALSO FITS:
Chevrolet:
Aveo 2012.2021.
Cruze 2012.2021.
TrailBlazer 2012.2021.

Rear view photographic camera for Chevrolet Aveo (2012-nowadays), Trailblazer (2012-present), Cruze. Designed for driving in reverse, it allows y'all to brandish on the display of the head unit of measurement (or a special mirror with a congenital-in display) the paradigm of what is in the hidden area behind your automobile.

The camera is designed for use in a hostile environs and has a loftier degree of protection IP67 against grit and wet (withal, it is not recommended to direct a jet of h2o at it during a car launder to avoid impairment to the camera). No additional brackets or wires are required to mountain the photographic camera. Installation and connexion are simple in execution, except for laying the video cable (from the installation site to the motorcar dashboard).

Caution and attention when driving in opposite is a prerequisite for condom driving. Rear-view mirrors provide the driver with a certain degree of sensation of what is happening behind the automobile, but there is even so no total control of the situation. The rear view camera for Chevrolet Swat VDC-108 cars perfectly copes with this office.

For greater safe when driving in reverse, the all-time choice. display a "motion picture" of what is happening exterior the driver'southward field of vision on the console screen (head unit of measurement, monitor). Past connecting a rear view photographic camera, yous volition get the desired result. High-quality optics, good resolution and excellent visibility (170 degrees. You can see nigh everything that happens backside the motorcar) is a guarantee of comfy and safe driving. Connecting a rear view camera to the system does non require any special skills (power /. and video cablevision), the just difficulty. intelligently lay the line cable through the car interior to the dashboard. The photographic camera is installed, as a rule, in the place of the license plate illumination, without violating the overall structure. Increased dust and moisture protection guarantee long-term use of the system, during the unabridged service life of the vehicle (still, information technology is non recommended to direct a jet of water nether pressure at the photographic camera when washing a automobile). High light sensitivity makes it possible to use the photographic camera in the night.

Compatibility.

The camera has a built-in license plate low-cal and is installed instead of it, without violating the overall structure of the organization.

Markup.

Switchable lane lines permit you lot to approximate the actual distance to an object without leaving your vehicle.

The camera's viewing angle is 170 °, which is much more the capabilities of human being vision. You go a panoramic view.

All connecting cables and mounting accessories are included with the device. The loftier quality of Swat components is ready to exist confirmed by hundreds of thousands of motorists who use our equipment not merely in Russia, only likewise in Republic of kazakhstan, Ukraine, Belarus and Moldova.

Specifications

Sensor	one/three "color CMOS
Resolution	480 TV lines
Number of pixels	648488
Concrete size of the matrix	iii.63mm X 2.73mm
Organization	PAL / NTSC
Viewing angle	170 degrees
Minimum illumination	0.2 LUX
Water tightness	IP67
Video output	1Vp-p, 75Ohm, RCA male
Signal / dissonance	48dB
Working voltage	12V DC
Storage temperature	-40 ° C 80 ° C
Working temperature	-30 ° C seventy ° C
Parking lines	yes (switchable)

Specifications are subject to change without notice.

The warranty does not apply in the following cases:
Failure to comply with product operating standards, exceeding operational parameters, careless treatment, wrong connection, etc.
Mechanical damage to the product and damage caused by the ingress of foreign objects, substances, liquids, etc.
Harm acquired past natural phenomena, natural disasters, fire, etc.
The product has been tampered with or repaired by unauthorized persons or service centers.
In case of installation and connectedness of the product by non-certified installation centers.

Procedure for installing a rear view camera on a Chevrolet Cruze

The procedure of installing the camera is not specially difficult, simply it will require some knowledge of wiring and the power to piece of work with your hands. To successfully install the device, you must follow the instructions beneath.

How to Install a REVERSE CAMERA | 2012 Chevy Cruze LT

When purchasing a photographic camera, you must take into account what type of body it is designed for. Camera bodies take various types of mounting. Two self-tapping screws are used for the sedan, and the devices are mounted in the hatchback using plastic latches.

The installation of the camera is supposed to be in a seat in which the standard room lighting is installed.

Installation is accompanied by the removal of the trim in the trunk. Access to the wiring site is required. One of the optimal cable entries is indicated in the photograph beneath with a cerise circle.

When laying the loops, it is necessary to ensure that no places announced where water can later enter.

rear, view, camera, chevrolet, cruze, hatchback

Dismantle the plafond of illumination of the state number.

Route the camera wires through the force per unit area conduit at the front of the vehicle The presence of grease inside the channel should be taken into account. To forbid the interior from getting dirty, it is recommended to wipe the cables with a rag.

The brought out cables demand to exist connected to the multimedia organization caput unit or a special rearview mirror, or a divide screen depending on how the front mounting arrangement of the rearview camera is planned.

Consummate the installation of the camera in the rear of the car.

Command device performance.

Tools Needed to Mount the Rear View Camera

In order to install a photographic camera, for example, Mylink on a Chevrolet Cruze, you will need a list of tools given in the table beneath.

Proper name Notation

Special tool for removing decorative caps	Tin exist replaced with a apartment blade screwdriver
Key	It is advisable to take a set of keys of various sizes.
Screwdriver	Cross and apartment blade
Multimeter	For continuity of chains

Also, during the installation process, yous may demand a rag to clean dirt, a knife for stripping the insulation and electrical tape to securely connect the wires.

Rear view photographic camera for Chevrolet Cruze

To reverse or park, the motorcar owner needs to know the distance to an obstacle, hitting which will damage the car.

For these purposes, a rear view camera can be installed on the Chevrolet Cruze. Past connecting it to the caput unit of the multimedia system or using a special mirror with a liquid crystal screen, the auto owner gets aid in feeling the dimensions of his vehicle.

Using a sedan camera on other body types

If the machine possessor has a camera on a sedan, then there are ways to mountain it on a hatchback or station wagon. To do this, you must use the instructions below.

The photo below shows a Mailink reversing photographic camera designed for sedans. For installation on a hatchback or station wagon, a small-scale amending will exist required.

There is a special decorative insert on the Chevrolet Cruze in hatchback and station carriage bodies, the purpose of which is to place the rear-view camera from the factory in some car trim levels.

To mount the camera, you must remove the plug.

If it is incommunicable to mount the camera in a seat due to an unsuitable housing, y'all can apply an alternative selection for fixing the device using a universal gum.