How To Connect Zmodo Camera To Wifi

If your Zmodo camera won't connect to WiFi, so follow this guide to fix the consequence rapidly. You demand to ready this problem as soon equally possible because the Zmodo camera needs WiFi to get the live stream, motion detection, and other phone alerts.

To ready a Zmodo camera not connecting to WiFi, you should make sure the WiFi connection works and meets all the requirements. Almost of the time, the issue is related to the frequency that the photographic camera is using, more specifically the router'southward WiFi may be operating at 2.4Ghz and 5Ghz and the camera is trying to connect to the wrong SSID.

In other words, the photographic camera is operating on ii.4Ghz frequency only it's connecting to the 5Ghz SSID (which is the wireless name). Follow the troubleshooting tips below to fix the effect.

Zmodo camera can't connect to the internet (WiFi)

In 90% of the cases, this trouble with the Zmodo camera happens if yous are using a dual-band router. That ways the router offers 2 WiFi signals, two.4Ghz, and 5Ghz. Your camera may simply be able to connect to 2.4Ghz and non 5Ghz (or vice versa), and so it can get stuck attempting to connect to both frequencies of your dual-ring router.

To ready the issue of the Zmodo camera not connecting to the net but rename the split SSDI'southward (WiFi proper name) then you can differentiate between them. Follow the steps.

Access your router settings (usually by typing the IP address of the router on the web browser and log in with your username/countersign).
Locate the WiFi menu.
If your router is dual-ring, yous should see two WiFi names in that location (one is ii.4Ghz, the other one is 5Ghz). Rename each of the SSID using different names. For example, rename the first ane "MyWiFi2.iv" and the other i "MyWiFi5".
Save the settings. Additionally, make sure your router is using the WPA or WPA2 for the encryption mode.

Permit'southward assume that you lot have a Zmodo camera that works on 2.4Ghz just. Since nosotros renamed both WiFi names of the router, you tin can connect the photographic camera straight to the 2.4Ghz indicate which to a higher place we renamed equally "MyWiFi2.4". Connect to information technology and the photographic camera volition start to work, no more failed connection.

Zmodo photographic camera doesn't take the WiFi password

Here'due south an effect with some of the Zmodo cameras: they don't have WiFi passwords that are more than 13 characters long. Permit'due south say your WiFi password contains 20 characters, if you lot enter it on the Zmodo camera app, it won't connect.

It'south a weird issue but it happens. The newer Zmodo models have this problem stock-still, just non some of their camera models. In that location'south no set up for this, all you lot take to do is to change the password of your WiFi and apply ane that contains less than thirteen characters.

Troubleshoot the WiFi setup (of Zmodo cameras)

Check if the WiFi signal is working in the get-go place. Maybe the camera can't connect considering the WiFi doesn't piece of work at all. Try to connect to the WiFi using your phone, or a computer, or any other device simply to ensure that the internet works.

If it seems that the other devices connect fine to the internet, then reboot the router and try again. Sometimes rebooting a device tin can do wonders.

Next check the WiFi strength, the bespeak must be stiff to cover your Zmodo camera. At the same time, make certain the camera is not far away from the router and that information technology'south within the nominal coverage. Yous tin can bring the camera closer merely to see if information technology connects.

A few tips on how to check the WiFi betoken strength:

Bank check the WiFi symbol on your telephone or tablet, it's displayed on the corner of the screen, and make sure all the bars are filled. The more than confined, the stronger the net.
Download apps every bit NetSpot, WiFi Analyzer, or Wireshark to test out the WiFi signal's forcefulness.

For some smartphones, you will demand to disable your 3G/4G LTE information connection during setup. One time you have configured your device, you can re-enable your 3G/4G LTE information connection.

If the Condition Light is blinking light-green on the camera, try removing special characters and spaces from the SSID (WiFi network proper name) like "?" or "!". Also, brand sure the app and the camera are updated to the latest firmware versions.

If the WiFi is okay but y'all're notwithstanding having problems, follow the steps below to troubleshoot your router for the SmartLink setup.

Admission your wireless router settings.
Detect the tab or settings for the Wireless.
Find the choice called Wireless Network Mode.
Gear up the wireless network way of your ii.4GHz wireless network to 802.11b merely, 802.11g merely, or 802.11b/yard merely.
Retry the SmartLink setup (or whatsoever Zmodo telephone app that you're using) from your smartphone while connecting to this network.
Later on the phone app successfully connects your wireless device to the WiFi network, yous can alter your settings back to their original value. The wireless device volition automatically connect to your network.

Conclusion

Zmodo camera not connecting to the WiFi is nearly of the fourth dimension related to dual-band routers and you need to rename the WiFi names for ii.4Ghz and 5Ghz. That way the camera volition differentiate both signals and correct them to the right one. Leave a annotate if you tin can't solve the problem, or contact the manufacturer.